Difference between revisions of "MindMotion MM32G0"
(→Internal Flash) |
|||
| Line 19: | Line 19: | ||
|- |
|- |
||
! Device Family || StartAddr !! Size || J-Link Support |
! Device Family || StartAddr !! Size || J-Link Support |
||
| + | |- |
||
| + | | MM32G0001 || 0x08000000 || 16KB || Yes |
||
|- |
|- |
||
| MM32G014 || 0x08000000 || 64KB || Yes |
| MM32G014 || 0x08000000 || 64KB || Yes |
||
Revision as of 13:50, 8 September 2023
Contents
The Mimdmotion MM32G0 series are 32-bit general-purpose microcontrollers based on the Arm®
Cortex®-M0 processor.
Device Family
| Device Family | Flash Size | RAM Size |
|---|---|---|
| MM32G0001 | 16KB | 2KB |
| MM32G014 | 64KB | 8KB |
| MM32G016 | 128KB | 16KB |
Supported Flash Banks
Internal Flash
| Device Family | StartAddr | Size | J-Link Support |
|---|---|---|---|
| MM32G0001 | 0x08000000 | 16KB | Yes |
| MM32G014 | 0x08000000 | 64KB | Yes |
| MM32G016 | 0x08000000 | 128KB | Yes |
Option Byte
| Device Family | StartAddr | Size | J-Link Support |
|---|---|---|---|
| MM32G014 | 0x1FFFF800 | 16B | Yes |
| MM32G016 | 0x1FFFF800 | 16B | Yes |
Reset
The device uses normal reset, no special handling necessary.
Minimum requirements
- J-Link software V7.82e or later
Evaluation Boards
- Mindmotion Mini-G0141 evaluation board: https://wiki.segger.com/MindMotion_Mini-G0141
Example Application
- Mindmotion Mini-G0141 evaluation board: https://wiki.segger.com/MindMotion_Mini-G0141#Example_Project
