Difference between revisions of "MindMotion MM32L0"
| Line 41: | Line 41: | ||
==Evaluation Boards== |
==Evaluation Boards== |
||
| − | * |
+ | *MindMotionMini-L0020 evaluation board: https://wiki.segger.com/MindMotion_Mini-L0020 |
| + | *MindMotionEVB-L0136 evaluation board: https://wiki.segger.com/MindMotion_EVB-L0136 |
||
==Example Application== |
==Example Application== |
||
| − | * |
+ | *MindMotionMini-L0020 evaluation board: https://wiki.segger.com/MindMotion_Mini-L0020#Example_Project |
| + | *MindMotionEVB-L0136 evaluation board: https://wiki.segger.com/MindMotion_EVB-L0136#Example_Project |
||
Revision as of 19:26, 27 March 2023
Contents
The Mimdmotion MM32L0 series are 32-bit general-purpose microcontrollers based on the Arm®
Cortex®-M0 processor.
Device Family
| Device Family | Flash Size | RAM Size |
|---|---|---|
| MM32L0020 | 32KB | 2KB |
| MM32L0130 | 32/64KB | 2/4KB |
Supported Flash Banks
Internal Flash
| Device Family | StartAddr | Size | J-Link Support |
|---|---|---|---|
| MM32L0020 | 0x08000000 | 32KB | Yes |
| MM32L0130 | 0x08000000 | 32/64KB | Yes |
Option Byte
| Device Family | StartAddr | Size | J-Link Support |
|---|---|---|---|
| MM32L0020 | 0x1FFFF800 | 16B | Yes |
| MM32L0130 | 0x1FFFF800 | 16B | Yes |
Reset
The device uses normal reset, no special handling necessary.
Minimum requirements
- J-Link software V7.82e or later
Evaluation Boards
- MindMotionMini-L0020 evaluation board: https://wiki.segger.com/MindMotion_Mini-L0020
- MindMotionEVB-L0136 evaluation board: https://wiki.segger.com/MindMotion_EVB-L0136
Example Application
- MindMotionMini-L0020 evaluation board: https://wiki.segger.com/MindMotion_Mini-L0020#Example_Project
- MindMotionEVB-L0136 evaluation board: https://wiki.segger.com/MindMotion_EVB-L0136#Example_Project
