MindMotion Mini-SPIN0280

From SEGGER Wiki
Revision as of 12:06, 16 April 2024 by Torben.scharping (talk | contribs) (→‎SETUP)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This article describes specifics for the MindMotion Mini-SPIN0280 evaluation board.
MindMotion Mini-SPIN0280 MM32SPIN0280D6PV board.jpg

Preparing for J-Link

  • Connect the J-Link to CN2.
  • Power the board via CN1.
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

MindMotion Mini-SPIN0280 MM32SPIN0280C6PV connect.png

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the MindMotion Mini-SPIN0280 .
It is a simple Hello World sample linked into the internal flash.

SETUP

Retrieved from "https://wiki.segger.com/index.php?title=MindMotion_Mini-SPIN0280&oldid=18763"