Mindmotion BIRD-F3F5 MM32F5287

From SEGGER Wiki
Revision as of 15:34, 8 May 2024 by Simon Buchholz (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This article describes specifics for the MindMotion BIRD-F3/F5 MM32F5287L8PV evaluation board.

450px

Minimum requirements

  • J-Link software V7.86i or later

Preparing for J-Link

  • Connect the J-Link to the SWD header (J1)
  • Power the board via USB-C (J5)
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

MindMotion BIRDF3F5 MM32F5287L8PV connect.png

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the MindMotion BIRD-F3/F5 MM32F5287.
It is a simple Hello World sample linked into the internal flash.

SETUP

Retrieved from "https://wiki.segger.com/index.php?title=Mindmotion_BIRD-F3F5_MM32F5287&oldid=19072"