View source for Mindmotion Mini-F5233-MM32F5233D7P

__TOC__

This article describes specifics for the Mindmotion Mini-F5233 MM32F5233D7P evaluation board.

[[File:MindMotion_MB-085-Mini-F5233_MM32F5233D7PV_board.jpg|450px]]

== Minimum requirements ==
* J-Link software V7.92d or later

== Preparing for J-Link ==
*Connect the J-Link to the SWD header (CN3)
*Power the board via USB-C (CN7)
* Verify the Connection with e.g. [https://wiki.segger.com/J-Link_cannot_connect_to_the_CPU#Verify_functionality_using_J-Link_Commander J-Link Commander]. The output should look as follows:

[[File:MindMotion_MB-085-Mini-F5233_MM32F5233D7PV_connect.png|400px]]

== Example Project==
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the MindMotion Mini-F5233 MM32F5233D7P. <br>
It is a simple Hello World sample linked into the internal flash.<br>
====SETUP====
*J-Link software: V7.92d
*Embedded Studio: V7.30
*Hardware: MindMotion Mini-F5233 MM32F5233D7P
*Link: [[File:MindMotion_MM32F5233_TestProject_ES_7V20.zip]]