NXP LPCXpresso860-MAX

From SEGGER Wiki

Revision as of 14:21, 7 September 2023 by Fabian (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

NXP LPCXpresso860-MAX evaluation board top side view

This article describes specifics for the NXP LPCXpresso860-MAX evaluation board.

Contents

1 Preparing for J-Link
2 Example Project

Preparing for J-Link

Connect the J-Link to J7 using the 9-Pin Cortex-M Adapter
Power the board via micro USB (J4)
Verify the Connection with e.g. with J-Link Commander. The output should look as follows:

Example Project

TBD

Retrieved from "https://wiki.segger.com/index.php?title=NXP_LPCXpresso860-MAX&oldid=16242"