Difference between revisions of "NXP MCXA10"
(Created page with "The '''NXP MCXA1''' are [SHORT_DESCRIPTION] __TOC__ ==Flash Banks== ===Internal Flash=== {| class="seggertable" |- ! Flash Bank || Base address !! Size || J-Link Support |- |...") |
|||
Line 1: | Line 1: | ||
− | The '''NXP MCXA1''' are |
+ | The '''NXP MCXA1''' are single core ARM Cortex-M33 microprocessors. |
__TOC__ |
__TOC__ |
||
Revision as of 12:58, 10 January 2024
The NXP MCXA1 are single core ARM Cortex-M33 microprocessors.
Contents
Flash Banks
Internal Flash
Flash Bank | Base address | Size | J-Link Support |
---|---|---|---|
Internal Flash | 0x00000000 | up to 128 KB |
ECC Flash
- Device has ECC Flash, but no special handling required.
ECC RAM
- Device has 8KB ECC RAM named SRAM A0, can be used when LPCAC is switched off
Watchdog Handling
- The device has 2 watchdogs WWDT and CDOG.
- The watchdog WWDT is fed during flash programming.
- No handling for CDOG implemented.
Device Specific Handling
Reset
- The J-Link performs a device specific reset sequence. SRAM and Flash is set to RWX.
Attach
Attach is supported.
Evaluation Boards
- NXP MCX-A14X-EVK evaluation board: http://techwiki.segger.local/NXP_MCX-A14X-EVK
Example Application
- NXP MCX-A14X-EVK evaluation board: http://techwiki.segger.local/NXP_MCX-A14X-EVK#Example_Project