Difference between revisions of "NXP RW61x"
(→Watchdog Handling) |
|||
| Line 16: | Line 16: | ||
==Watchdog Handling== |
==Watchdog Handling== |
||
*No Watchdog handling |
*No Watchdog handling |
||
| − | |||
==Device Specific Handling== |
==Device Specific Handling== |
||
Revision as of 15:37, 24 August 2023
The NXP RW61x are Cortex_M33 based Wireless MCUs with Integrated Radio: 1x1 Wi-Fi® 6 + Bluetooth® Low Energy 5.3.
Contents
Flash Banks
External QSPI Flash
| Flash Bank | Base address | Size | J-Link Support |
|---|---|---|---|
| QSPI | 0x08000000 | Up to 128MB | 
|
QSPI flash programming requires special handling compared to internal flash. For more information about this, please see the [[QSPI Flash Programming Support | Device has only one pin configuration.
Watchdog Handling
- No Watchdog handling
Device Specific Handling
Reset
- The device uses custom reset: Reset and Halt after Bootloader.
Attach
Attach is not supported.
Evaluation Boards
- NXP RD-RW616-BGA_IPA-2A/1A evaluation board: http://wiki.segger.com/NXP_RD-RW616-BGA_IPA-2A/1A
Example Application
- NXP RD-RW616-BGA_IPA-2A/1A evaluation board: http://wiki.segger.com/NXP_RD-RW616-BGA_IPA-2A/1A#Example_Project
