Difference between revisions of "NXP RW61x"
(→Watchdog Handling) |
|||
| Line 26: | Line 26: | ||
==Evaluation Boards== |
==Evaluation Boards== |
||
| − | *NXP RD-RW616-BGA_IPA-2A/1A evaluation board: |
+ | *NXP RD-RW616-BGA_IPA-2A/1A evaluation board: [[NXP RD-RW616-BGA_IPA-2A/1A]] |
==Example Application== |
==Example Application== |
||
| − | *NXP RD-RW616-BGA_IPA-2A/1A evaluation board: |
+ | *NXP RD-RW616-BGA_IPA-2A/1A evaluation board: [[NXP RD-RW616-BGA_IPA-2A/1A#Example Project]] |
Revision as of 11:25, 10 October 2023
The NXP RW61x are Cortex_M33 based Wireless MCUs with Integrated Radio: 1x1 Wi-Fi® 6 + Bluetooth® Low Energy 5.3.
Contents
Flash Banks
External QSPI Flash
| Flash Bank | Base address | Size | J-Link Support |
|---|---|---|---|
| QSPI | 0x08000000 | Up to 128MB | 
|
QSPI flash programming requires special handling compared to internal flash. For more information about this, please see the [[QSPI Flash Programming Support | Device has only one pin configuration.
Watchdog Handling
- No Watchdog handling
Device Specific Handling
Reset
- The device uses custom reset: Reset and Halt after Bootloader.
Attach
Attach is not supported.
Evaluation Boards
- NXP RD-RW616-BGA_IPA-2A/1A evaluation board: NXP RD-RW616-BGA_IPA-2A/1A
Example Application
- NXP RD-RW616-BGA_IPA-2A/1A evaluation board: NXP RD-RW616-BGA_IPA-2A/1A#Example Project
