NXP S32K144EVB-Q100

From SEGGER Wiki
Revision as of 15:59, 16 November 2020 by Alex (talk | contribs) (→‎Connecting via on-board OpenSDA)
Jump to: navigation, search

Connecting an external J-Link

The eval board provides 2 debug connectors:

  • J12 SDA (Connects to the OpenSDA on the board. Usually not needed by the user. Only needed to reflash the bootloader of OpenSDA if needed)
  • J14 SWD (Connects to the S32K144 device)

J14 SWD can be used to connect an external J-Link to the S32K144 device. A J-Link 9-pin Cortex-M adapter is needed to adapt to J14 SWD.

Connecting via on-board OpenSDA

The eval board provides an on-board debug circuit called OpenSDA. This debug circuit can run a firmware to make it behave like a J-Link. The firmware (OpenSDA V1 Bootloader) can be downloaded here: Download - OpenSDA firmwares For more information how to flash the firmware onto the OpenSDA, please refer to here: SEGGER website - OpenSDA

S32K144EVB-Q100.png

Retrieved from "https://wiki.segger.com/index.php?title=NXP_S32K144EVB-Q100&oldid=9276"