NXP X-MIMXRT1180-EVK

From SEGGER Wiki

Revision as of 08:40, 22 September 2023 by Erik (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

Contents

1 Preparing for J-Link
2 Example Project

This article describes specifics for the NXP X-MIMXRT1180-EVK evaluation board.

Preparing for J-Link

Connect the J-Link to ......
Power the board via........
Verify the Connection with e.g. J-Link Commander. The output should look as follows:

Example Project

TBD

Retrieved from "https://wiki.segger.com/index.php?title=NXP_X-MIMXRT1180-EVK&oldid=16373"