NXP X-MIMXRT1180-EVK

From SEGGER Wiki
Revision as of 08:41, 22 September 2023 by Erik (talk | contribs) (→‎Preparing for J-Link)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This article describes specifics for the NXP X-MIMXRT1180-EVK evaluation board.
NXP X-MIMXRT1180-EVK.jpg

Preparing for J-Link

  • Connect the J-Link to J37
  • Power the board via J2 (DC 5V) + enable the power switch (SW1)
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

NXP RT1180 CONNECT.PNG

Example Project

TBD

Retrieved from "https://wiki.segger.com/index.php?title=NXP_X-MIMXRT1180-EVK&oldid=16374"