Difference between revisions of "Nuvoton M26x"
(→Internal Flash) |
|||
| Line 27: | Line 27: | ||
|} |
|} |
||
| + | |||
| − | <!-- |
||
| − | ===Option Byte === |
||
| − | {| class="seggertable" |
||
| − | |- |
||
| − | ! Device || StartAddr !! Size || J-Link Support |
||
| − | |- |
||
| − | | GD32A503xB || 0x1FFFF800 || 24 Byte || YES |
||
| − | |- |
||
| − | | GD32A503xC || 0x1FFFF800 || 24 Byte|| YES |
||
| − | |- |
||
| − | | GD32A503xD || 0x1FFFF800 || 24 Byte|| YES |
||
| − | |} |
||
| − | --> |
||
==Reset== |
==Reset== |
||
| Line 45: | Line 33: | ||
==Minimum requirements== |
==Minimum requirements== |
||
| − | * J-Link software V7. |
+ | * J-Link software V7.84b or later |
| + | Nuvoton_NuMaker-M263KI |
||
| − | |||
==Evaluation Boards== |
==Evaluation Boards== |
||
| − | * |
+ | *Nuvoton NuMaker-M263KIL evaluation board: https://wiki.segger.com/Nuvoton_NuMaker-M263KI |
==Example Application== |
==Example Application== |
||
| − | * |
+ | *Nuvoton NuMaker-M263KIL evaluation board: https://wiki.segger.com/Nuvoton_NuMaker-M263KI#Example_Project |
Revision as of 17:57, 9 January 2023
Contents
The Nuvoton M26x series are 32-bit low-power microcontrollers based on the Arm®
Cortex®-M23 processor.
Internal RAM
| Device | StartAddr | Size |
|---|---|---|
| M261x | 0x20000000 | 32+64Kb |
| M262x | 0x20000000 | 32+64Kb |
| M263x | 0x20000000 | 32+64Kb |
Supported Flash Banks
Internal Flash
| Device | StartAddr | Size | J-Link Support |
|---|---|---|---|
| M261x | 0x00000000 | 265+256Kb | YES |
| M262x | 0x00000000 | 265+256Kb | YES |
| M263x | 0x00000000 | 265+256Kb | YES |
Reset
The device uses normal reset, no special handling necessary.
Minimum requirements
- J-Link software V7.84b or later
Nuvoton_NuMaker-M263KI
Evaluation Boards
- Nuvoton NuMaker-M263KIL evaluation board: https://wiki.segger.com/Nuvoton_NuMaker-M263KI
Example Application
- Nuvoton NuMaker-M263KIL evaluation board: https://wiki.segger.com/Nuvoton_NuMaker-M263KI#Example_Project
