Difference between revisions of "Nuvoton M26x"
| Line 34: | Line 34: | ||
==Minimum requirements== |
==Minimum requirements== |
||
* J-Link software V7.84b or later |
* J-Link software V7.84b or later |
||
| + | |||
| − | Nuvoton_NuMaker-M263KI |
||
==Evaluation Boards== |
==Evaluation Boards== |
||
*Nuvoton NuMaker-M263KI evaluation board: https://wiki.segger.com/Nuvoton_NuMaker-M263KI |
*Nuvoton NuMaker-M263KI evaluation board: https://wiki.segger.com/Nuvoton_NuMaker-M263KI |
||
Revision as of 17:58, 9 January 2023
Contents
The Nuvoton M26x series are 32-bit low-power microcontrollers based on the Arm®
Cortex®-M23 processor.
Internal RAM
| Device | StartAddr | Size |
|---|---|---|
| M261x | 0x20000000 | 32+64Kb |
| M262x | 0x20000000 | 32+64Kb |
| M263x | 0x20000000 | 32+64Kb |
Supported Flash Banks
Internal Flash
| Device | StartAddr | Size | J-Link Support |
|---|---|---|---|
| M261x | 0x00000000 | 265+256Kb | YES |
| M262x | 0x00000000 | 265+256Kb | YES |
| M263x | 0x00000000 | 265+256Kb | YES |
Reset
The device uses normal reset, no special handling necessary.
Minimum requirements
- J-Link software V7.84b or later
Evaluation Boards
- Nuvoton NuMaker-M263KI evaluation board: https://wiki.segger.com/Nuvoton_NuMaker-M263KI
Example Application
- Nuvoton NuMaker-M263KI evaluation board: https://wiki.segger.com/Nuvoton_NuMaker-M263KI#Example_Project
