Nuvoton M26x
Revision as of 20:17, 16 January 2023 by Torben.scharping (talk | contribs)
Contents
The Nuvoton M26x series are 32-bit low-power microcontrollers based on the Arm®
Cortex®-M23 processor.
Flash Banks
Internal Flash
| Device | Base address | Size | J-Link Support |
|---|---|---|---|
| M261x | 0x00000000 | 256 + 256 KB | 
|
| M262x | 0x00000000 | 256 + 256 KB |
|
| M263x | 0x00000000 | 256 + 256 KB |
|
Internal RAM
| Device | StartAddr | Size |
|---|---|---|
| M261x | 0x20000000 | 32+64Kb |
| M262x | 0x20000000 | 32+64Kb |
| M263x | 0x20000000 | 32+64Kb |
Supported Flash Banks
Internal Flash
| Device | StartAddr | Size | J-Link Support |
|---|---|---|---|
| M261x | 0x00000000 | 265+256Kb | YES |
| M262x | 0x00000000 | 265+256Kb | YES |
| M263x | 0x00000000 | 265+256Kb | YES |
Reset
The device uses normal reset, no special handling necessary.
Minimum requirements
- J-Link software V7.84b or later
Evaluation Boards
- Nuvoton NuMaker-M263KI evaluation board: https://wiki.segger.com/Nuvoton_NuMaker-M263KI
Example Application
- Nuvoton NuMaker-M263KI evaluation board: https://wiki.segger.com/Nuvoton_NuMaker-M263KI#Example_Project
The Nuvoton M071x series are Cortex-M0 microcontrollers for home appliance systems.
Device Specifc Handling
Reset
- The devices uses normal Cortex-M reset, no special handling necessary, like described here.
Evaluation Boards
- Nuvoton NuMaker-M071MD evaluation board: https://wiki.segger.com/Nuvoton-NuMaker-M071MD
- Nuvoton NuMaker-M071R1E evaluation board: https://wiki.segger.com/Nuvoton-NuMaker-M071R1E
- Nuvoton NuMaker-M071VG evaluation board: https://wiki.segger.com/Nuvoton-NuMaker-M071VG
Example Application
- Nuvoton NuMaker-M071MD evaluation board: https://wiki.segger.com/Nuvoton-NuMaker-M071MD#Example_Project
- Nuvoton NuMaker-M071R1E evaluation board: https://wiki.segger.com/Nuvoton-NuMaker-M071R1E#Example_Project
- Nuvoton NuMaker-M071VG evaluation board: https://wiki.segger.com/Nuvoton-NuMaker-M071VG#Example_Project
