Difference between revisions of "Nuvoton NuMaker-M463KG"

From SEGGER Wiki
Jump to: navigation, search
Line 6: Line 6:
 
== Preparing for J-Link ==
  
== Preparing for J-Link ==
 
*Connect the J-Link : VTref=J1-2 / SWDIO=J1-4 / SWCLK=J1-6 / GND=J1-10
  
*Connect the J-Link : VTref=J1-2 / SWDIO=J1-4 / SWCLK=J1-6 / GND=J1-10
−
*Power the board via J2 or ICE J3
 +
*Power the board via J3 or ICE J3
 
* Verify the Connection with e.g. [https://wiki.segger.com/J-Link_cannot_connect_to_the_CPU#Verify_functionality_using_J-Link_Commander J-Link Commander]. The output should look as follows:
  
* Verify the Connection with e.g. [https://wiki.segger.com/J-Link_cannot_connect_to_the_CPU#Verify_functionality_using_J-Link_Commander J-Link Commander]. The output should look as follows:
 
[[File:Nuvoton_NuMaker-M463KG_V1.1_M463KGCAE_connect.png|400px]]
  
[[File:Nuvoton_NuMaker-M463KG_V1.1_M463KGCAE_connect.png|400px]]

Revision as of 12:43, 23 March 2023

This article describes specifics for the Nuvoton NuMaker-M463KG evaluation board.
600px

Preparing for J-Link

  • Connect the J-Link : VTref=J1-2 / SWDIO=J1-4 / SWCLK=J1-6 / GND=J1-10
  • Power the board via J3 or ICE J3
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

Nuvoton NuMaker-M463KG V1.1 M463KGCAE connect.png

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the Nuvoton NuMaker-M463KG.
It is a simple Hello World sample linked into the internal flash.

SETUP

Retrieved from "https://wiki.segger.com/index.php?title=Nuvoton_NuMaker-M463KG&oldid=14516"