Difference between revisions of "ONSemi RSL15"
(Created page with "__TOC__ RSL15 is a highly integrated secure Arm Cortex-M33-based Bluetooth Low Energy 5.2 wireless MCU system-on-a-chip, with flash and RAM, built-in power management, and an...") |
(→On-Chip Memory Regions) |
||
Line 7: | Line 7: | ||
J-Link supports debugging and programming of the following memory regions. |
J-Link supports debugging and programming of the following memory regions. |
||
− | ==On-Chip Memory Regions== |
+ | ==On-Chip Memory Regions for RSL15-512== |
The internal flash is divided into 6 different regions: |
The internal flash is divided into 6 different regions: |
||
Revision as of 10:50, 10 June 2021
Contents
RSL15 is a highly integrated secure Arm Cortex-M33-based Bluetooth Low Energy 5.2 wireless MCU system-on-a-chip, with flash and RAM, built-in power management, and an extensive set of peripherals. The wide supply voltage input, flexible I/O, and clocking scheme offer maximum design flexibility.
Debug Support
J-Link supports debugging and programming of the following memory regions.
On-Chip Memory Regions for RSL15-512
The internal flash is divided into 6 different regions:
Instance Name | Size (bytes) | Memory region |
---|---|---|
Code Flash | 360448 | 0x00100000 - 0x00157FFF |
Data Flash | 10240 | 0x00158000 - 0x0017FFFF |
Non-Volatile Record (NVR) 4 | 256 | 0x00080400 - 0x000804FF |
Non-Volatile Record (NVR) 5 | 256 | 0x00080500 - 0x000805FF |
Non-Volatile Record (NVR) 6 | 256 | 0x00080600 - 0x000806FF |
Non-Volatile Record (NVR) 7 (Manufacturing Test) |
256 | 0x00080700 - 0x000807FF |
NOTE: J-Link supports the Code Flash , Data Flash, as well as NVR4 - NVR7.
Reset
It seems like a normal reset via SYSRESETREQ & VECTRESET bit does not work properly on this device. Therefore, the J-Link software performs a specific reset which makes sure that CPU is halted right before the target application but after boot ROM.
Evaluation Boards
TBD
Example Application
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the ON Semiconductor RSL10 SiP EVB V1.2. It is a simple Hello World sample linked into the internal flash.
SETUP:
- J-Link software: V7.23b
- Embedded Studio: V5.42
- Hardware: ON Semiconductor RSL15 EVB V1.1
- Link: File:ONSemi RSL15 TestProject ES V542.zip