Difference between revisions of "OpenOCD"
(→Using J-Link with OpenOCD) |
|||
Line 1: | Line 1: | ||
+ | OpenOCD is a open and free project to support different debug probes under one "API". |
||
__TOC__ |
__TOC__ |
||
+ | == Using J-Link with OpenOCD == |
||
− | = About = |
||
− | OpenOCD is a open and free project to support different debug probes under one "API". |
||
− | |||
− | = Using J-Link with OpenOCD = |
||
In general, it is possible to use J-Link with OpenOCD. OpenOCD handles J-Link as a dumb JTAG/SWD/... probe and only uses the very low level logic to output JTAG/SWD/... sequences. It does not make use of any high level logic etc. and therefore is much slower than the proprietary SEGGER J-Link DLL / GDBServer / ... implementation. |
In general, it is possible to use J-Link with OpenOCD. OpenOCD handles J-Link as a dumb JTAG/SWD/... probe and only uses the very low level logic to output JTAG/SWD/... sequences. It does not make use of any high level logic etc. and therefore is much slower than the proprietary SEGGER J-Link DLL / GDBServer / ... implementation. |
||
Revision as of 10:24, 23 March 2023
OpenOCD is a open and free project to support different debug probes under one "API".
Contents
Using J-Link with OpenOCD
In general, it is possible to use J-Link with OpenOCD. OpenOCD handles J-Link as a dumb JTAG/SWD/... probe and only uses the very low level logic to output JTAG/SWD/... sequences. It does not make use of any high level logic etc. and therefore is much slower than the proprietary SEGGER J-Link DLL / GDBServer / ... implementation.
Switching the USB driver to OpenOCD
In order to use J-Link with OpenOCD the standard J-Link USB driver must be replaced with the WinUSB driver, using 3rd party utilities. There are lots of walkthroughs available on the internet.
Restoring the USB driver
Once the J-Link USB driver has been replaced, no SEGGER software from the J-Link software package will be able to communicate with J-Link anymore.
To use SEGGER J-Link software again, the USB driver needs to be switched back to its default.
This can be achieved by
- navigating to the J-Link software installation (by default C:\Program Files\SEGGER\JLink\)
- navigating to the sub folder USBDriver\
- Double clicking InstDrivers.exe
Limitations
There are several limitations that apply when using J-Link with OpenOCD instead of the SEGGER J-Link software:
- Much slower than using J-Link with the SEGGER J-Link DLL
- No RTT support
- No HSS support
- No unlimited flash breakpoints support
- No support for any utilities from the SEGGER J-Link software package
- No support from SEGGER
Support
Please understand that SEGGER does not provide any support for J-Links used with OpenOCD. The OpenOCD software is released and maintained by a 3rd party. In order to get support, we recommend to get in touch with the OpenOCD community.