Difference between revisions of "RZ/G1E Starter Kit"
(Created page with "The RZ/G1E Starter Kit board's JTAG connector (CN1) is initially configured for JTAG Boundary SCAN. In order to connect to the CPU's debug port, at first the board needs to b...") |
(No difference)
|
Revision as of 08:57, 1 July 2016
The RZ/G1E Starter Kit board's JTAG connector (CN1) is initially configured for JTAG Boundary SCAN.
In order to connect to the CPU's debug port, at first the board needs to be manually reconfigured. This can be done by switching SW7/1 (MD21) to OFF (logic 1).
