Renesas DA1470x DevKit

From SEGGER Wiki
Revision as of 12:14, 24 February 2023 by Matthias (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This article describes specifics for the Renesas DA1470x DevKit evaluation board.
Renesas DA1470x DevKit.jpg

Preparing for J-Link

  • Connect the J-Link to the 19-pin debug connector (J31).
  • Power the board via USB (J8).
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

Renesas DA1470x DevKit Connect.PNG

Retrieved from "https://wiki.segger.com/index.php?title=Renesas_DA1470x_DevKit&oldid=14273"