Renesas EK-RA8D1

From SEGGER Wiki
Revision as of 16:20, 25 October 2023 by Matthias (talk | contribs) (Created page with "__TOC__ This article describes specifics for the Renesas EK-RA8D1 evaluation board. For device specifics, please see Renesas RA8D1.<br> [[File:Renesas_EK-RA8D1.jpg|450px]...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This article describes specifics for the Renesas EK-RA8D1 evaluation board. For device specifics, please see Renesas RA8D1.
Renesas EK-RA8D1.jpg

Preparing for J-Link

  • Power the board via J10 (Micro USB)
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

Renesas EK-RA8D1 CONNECT.PNG

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the Renesas EK-RA8D1.
It is a simple counter linked into the internal code flash.

SETUP

Retrieved from "https://wiki.segger.com/index.php?title=Renesas_EK-RA8D1&oldid=16792"