Renesas RA6T1 Motor Control Evaluation System
Revision as of 15:22, 8 May 2024 by Simon Buchholz (talk | contribs)
Contents
This article describes specifics for the RA6T1 Motor Control Evaluation System.
Example Project
The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the RA6T1 Motor Control Evaluation System. It is a simple RTT Hello World sample linked into the internal program flash.
Requirements
- J-Link Software V7.23b or above
- Embedded Studio: V5.50a or above
- Hardware: RA6T1 Motor Control Evaluation System
- Link: File:RA6T1 EvalBoard ES 550a Project.zip