Difference between revisions of "Renesas RX660"
(Created page with "This article describes device specifics of the Renesas RX660 series microcontrollers. =Requirements= * J-Link software V7.70 or later: [https://www.segger.com/downloads/jlink...") |
(→Requirements) |
||
| Line 4: | Line 4: | ||
* J-Link software V7.70 or later: [https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack Download] |
* J-Link software V7.70 or later: [https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack Download] |
||
Programming of the internal code flash, data flash and option-setting memory has been verified with the following J-Flash project and data files: |
Programming of the internal code flash, data flash and option-setting memory has been verified with the following J-Flash project and data files: |
||
| − | * [[File: |
+ | * [[File:FlashProgVerify_Renesas_R5F56609_RX660.zip]] |
=Option-setting memory= |
=Option-setting memory= |
||
Latest revision as of 16:07, 5 August 2022
This article describes device specifics of the Renesas RX660 series microcontrollers.
Requirements
- J-Link software V7.70 or later: Download
Programming of the internal code flash, data flash and option-setting memory has been verified with the following J-Flash project and data files:
Option-setting memory
Programming the option setting memory at address 0x00120040 is supported.
User boot area
Programming of user boot area at address 0xFF7F8000 is not supported
Supported debug interfaces
The following debug interfaces are supported for the RX66T series:
- JTAG
- FINE
