Difference between revisions of "Renesas RX66T"
(One intermediate revision by the same user not shown) | |||
Line 4: | Line 4: | ||
* J-Link software V6.47e or later: [https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack Download] |
* J-Link software V6.47e or later: [https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack Download] |
||
Programming of the internal code flash, data flash and option-setting memory has been verified with the following J-Flash project and data files: |
Programming of the internal code flash, data flash and option-setting memory has been verified with the following J-Flash project and data files: |
||
+ | * [[File:FlashProgVerify_Renesas_R5F566TE_RX66T.zip]] |
||
− | |||
− | [[File:FlashProgVerify_Renesas_R5F566TE_RX66T.zip | Test project and files]] |
||
− | |||
− | [[File:FlashProgVerify_Renesas_R5F572MN_RX72M.zip]] |
||
− | |||
− | [[File:FlashProgVerify_Renesas_R5F572TK_RX72T.zip]] |
||
=Option-setting memory= |
=Option-setting memory= |
Revision as of 16:55, 3 July 2019
This article describes device specifics of the Renesas RX66T series microcontrollers.
Requirements
- J-Link software V6.47e or later: Download
Programming of the internal code flash, data flash and option-setting memory has been verified with the following J-Flash project and data files:
Option-setting memory
Programming the option setting memory at addr. 0x12_0040 is supported.
User boot area
Programming of UB code A and UB code B in user boot area at 0xFF7F_FFE8 is not suppored
Supported debug interfaces
The following debug interfaces are supported for the RX66T series:
- JTAG
- FINE