Difference between revisions of "SAMA5D2 XPlained Ultra"
(Created page with "The SAMA5D2 XPlained Ultra eval board with the ATSAMA5D27 CPU has QSPI Flash on board. This configuration is supported by J-Link version V6.30f and later and can be programmed...") |
|||
| (2 intermediate revisions by one other user not shown) | |||
| Line 6: | Line 6: | ||
[[Media:Microchip_ATSAMA5D27_Flash.zip|Microchip_ATSAMA5D27_Flash.zip]] |
[[Media:Microchip_ATSAMA5D27_Flash.zip|Microchip_ATSAMA5D27_Flash.zip]] |
||
| + | For all other QSPI setups with that device a new flash loader must be created. For this SEGGERs [[Device Support Kit]] can be used. |
||
| − | '''Note:''' Jumper settings are crucial on this board. DEBUG_DIS and BOOT_DIS must not be populated. |
||
| + | |||
| − | All other jumpers except J16 are populated. |
||
| + | '''Note:''' Jumper settings are crucial on this board. DEBUG_DIS and BOOT_DIS jumpers must not be set. |
||
| + | All other jumpers except J16 are set. |
||
Latest revision as of 14:24, 23 March 2023
The SAMA5D2 XPlained Ultra eval board with the ATSAMA5D27 CPU has QSPI Flash on board. This configuration is supported by J-Link version V6.30f and later and can be programmed directly using one of our software tools.
The following example project has been created with Embedded Studio and can be used with version 3.34 or later:
Microchip_ATSAMA5D27_Flash.zip
For all other QSPI setups with that device a new flash loader must be created. For this SEGGERs Device Support Kit can be used.
Note: Jumper settings are crucial on this board. DEBUG_DIS and BOOT_DIS jumpers must not be set. All other jumpers except J16 are set.
