SAMA5D2 XPlained Ultra

From SEGGER Wiki
Revision as of 12:06, 8 March 2018 by Nino (talk | contribs) (Created page with "The SAMA5D2 XPlained Ultra eval board with the ATSAMA5D27 CPU has QSPI Flash on board. This configuration is supported by J-Link version V6.30f and later and can be programmed...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The SAMA5D2 XPlained Ultra eval board with the ATSAMA5D27 CPU has QSPI Flash on board. This configuration is supported by J-Link version V6.30f and later and can be programmed directly using one of our software tools.

The following example project has been created with Embedded Studio and can be used with version 3.34 or later:

Microchip_ATSAMA5D27_Flash.zip

Note: Jumper settings are crucial on this board. DEBUG_DIS and BOOT_DIS must not be populated. All other jumpers except J16 are populated.

Retrieved from "https://wiki.segger.com/index.php?title=SAMA5D2_XPlained_Ultra&oldid=2395"