Difference between revisions of "SAM C21 Xplained Pro"
(Created page with "'''J-Link EDBG unable to connect to target''' The Atmel SAM C21 Xplained Pro requires some special handling inside the J-Link EDBG firmware to work correctly. This special han...") |
|||
| Line 1: | Line 1: | ||
'''J-Link EDBG unable to connect to target''' |
'''J-Link EDBG unable to connect to target''' |
||
| − | The Atmel SAM C21 Xplained Pro requires some special handling inside the J-Link EDBG firmware to work correctly. This special handling has been added in the J-Link EDBG firmware from 16-04-26. Please make sure that this or a later version of the firmware is used. For more information about how to get the latest firmware and how to replace the Atmel EDBG firmware with a J-Link EDBG firmware, please refer to our website: [https://www.segger.com/jlink-edbg.html |
+ | The Atmel SAM C21 Xplained Pro requires some special handling inside the J-Link EDBG firmware to work correctly. This special handling has been added in the J-Link EDBG firmware from 16-04-26. Please make sure that this or a later version of the firmware is used. For more information about how to get the latest firmware and how to replace the Atmel EDBG firmware with a J-Link EDBG firmware, please refer to our website: [https://www.segger.com/jlink-edbg.html https://www.segger.com/jlink-edbg.html] |
---- |
---- |
||
Revision as of 18:44, 26 April 2016
J-Link EDBG unable to connect to target The Atmel SAM C21 Xplained Pro requires some special handling inside the J-Link EDBG firmware to work correctly. This special handling has been added in the J-Link EDBG firmware from 16-04-26. Please make sure that this or a later version of the firmware is used. For more information about how to get the latest firmware and how to replace the Atmel EDBG firmware with a J-Link EDBG firmware, please refer to our website: https://www.segger.com/jlink-edbg.html
