SAM C21 Xplained Pro

From SEGGER Wiki
Revision as of 18:44, 26 April 2016 by Alex (talk | contribs)
Jump to: navigation, search

J-Link EDBG unable to connect to target The Atmel SAM C21 Xplained Pro requires some special handling inside the J-Link EDBG firmware to work correctly. This special handling has been added in the J-Link EDBG firmware from 16-04-26. Please make sure that this or a later version of the firmware is used. For more information about how to get the latest firmware and how to replace the Atmel EDBG firmware with a J-Link EDBG firmware, please refer to our website: https://www.segger.com/jlink-edbg.html

Retrieved from "https://wiki.segger.com/index.php?title=SAM_C21_Xplained_Pro&oldid=340"