Difference between revisions of "STM3241G-EVAL"
(Created page with "==Jumper settings to enable trace pins== In order to enable the trace pins on this particular board jumpers JP1 and JP2 need to be in a fixed position. * JP1: Connect PE4 to...") |
(No difference)
|
Revision as of 09:16, 31 May 2017
Jumper settings to enable trace pins
In order to enable the trace pins on this particular board jumpers JP1 and JP2 need to be in a fixed position.
- JP1: Connect PE4 to trace connector CN13 as TRACE_D1 by setting JP1 on position 1-2
- JP2: Connect PE3 to trace connector CN13 as TRACE_D0 by setting JP2 to position 1-2