Difference between revisions of "STM32F746G DISCO"
(→Quad-SPI Interface Pins) |
(→Limitations) |
||
Line 24: | Line 24: | ||
= Limitations = |
= Limitations = |
||
==== External Debugger ==== |
==== External Debugger ==== |
||
− | The |
+ | The STM32F746G Discovery board does not come with an connector for external debug probes. We recommend to convert the on board ST-Link to a J-Link OB in order to be able to use this board with J-Link: |
*https://www.segger.com/products/debug-probes/j-link/models/other-j-links/st-link-on-board/ |
*https://www.segger.com/products/debug-probes/j-link/models/other-j-links/st-link-on-board/ |
Latest revision as of 18:19, 4 November 2020
Contents
QSPI Flash Programming Support
Before continuing with this article, please read the generic article about QSPI flash programming support on STM32F7 devices (STM32F7 (Q)SPI support).
Quad-SPI Interface Pins
The ST STM32F746G Discovery uses the following port pins to interface the (Q)SPI flash.
Alternate function | Port / Pin |
---|---|
QSPI_CLK | PB2 |
QSPI_CS | PB6 |
QSPI_D0 | PD11 |
QSPI_D1 | PD12 |
QSPI_D2 | PE2 |
QSPI_D3 | PD13 |
Limitations
External Debugger
The STM32F746G Discovery board does not come with an connector for external debug probes. We recommend to convert the on board ST-Link to a J-Link OB in order to be able to use this board with J-Link: