Difference between revisions of "ST STM32WBA"

From SEGGER Wiki
Jump to: navigation, search
(Watchdog Handling)
Line 15: Line 15:
 
|}
 
|}
   
  +
== Option bytes flash ==
  +
Option byte programming is directly supported by J-Link.
  +
Alternatively, option bytes can be programmed via the Flash registers as shown in the [[ST_STM32 | ST STM32 main article]].
   
 
==Watchdog Handling==
 
==Watchdog Handling==

Revision as of 10:37, 4 July 2023

The ST STM32WBA series are Cortex-M33 based wireless MCUs for Bluetooth® Low Energy 5.3-enabled applications.

Flash Banks

Internal Flash

Flash Bank Base address Size J-Link Support
Internal flash NS 0x08000000 Up to 1MB YES.png
Internal flash S 0x0C000000 Up to 1MB YES.png
User Option 0x40022040 48B YES.png

Option bytes flash

Option byte programming is directly supported by J-Link. Alternatively, option bytes can be programmed via the Flash registers as shown in the ST STM32 main article.

Watchdog Handling

  • The device has 2 watchdogs, IWDG & WWDG.
  • Both are fed during flash programming.

Device Specific Handling

Connect

Reset

  • The devices uses normal Cortex-M reset, no special handling necessary, like described here.
  • The devices uses Cortex-M Core reset, no special handling necessary, like described here.
  • The devices uses Cortex-M Rest Pin, no special handling necessary, like described here.
  • The device uses custom reset:.....

Security

Evaluation Boards

Example Application