Difference between revisions of "ST STM32WBA"
(→Internal Flash) |
|||
| Line 11: | Line 11: | ||
|- |
|- |
||
| Internal flash S || 0x0C000000 || Up to 1MB || style="text-align:center;"| {{YES}} |
| Internal flash S || 0x0C000000 || Up to 1MB || style="text-align:center;"| {{YES}} |
||
| − | |- |
||
| − | | User Option || 0x40022040|| 48B || style="text-align:center;"| {{YES}} |
||
|} |
|} |
||
Revision as of 15:48, 4 July 2023
The ST STM32WBA series are Cortex-M33® based wireless MCUs for Bluetooth® Low Energy 5.3-enabled applications.
Contents
Flash Banks
Internal Flash
| Flash Bank | Base address | Size | J-Link Support |
|---|---|---|---|
| Internal flash NS | 0x08000000 | Up to 1MB | 
|
| Internal flash S | 0x0C000000 | Up to 1MB |
|
Option bytes flash
Option byte programming is directly supported by J-Link. Alternatively, option bytes can be programmed via the Flash registers as shown in the ST STM32 main article.
Watchdog Handling
- The device has 2 watchdogs, IWDG & WWDG.
- Both are fed during flash programming.
Device Specific Handling
Reset
- The devices uses normal Cortex-M reset, no special handling necessary, like described here.
Evaluation Boards
- ST NUCLEO-WBA52CG evaluation board: https://wiki.segger.com/ST_NUCLEO-WBA52CG
Example Application
- ST NUCLEO-WBA52CG evaluation board: https://wiki.segger.com/ST_NUCLEO-WBA52CG#Example_Project
