Difference between revisions of "Setting read out protection on STM32F0 devices"
(→Script files and sample projects) |
(Redirected page to STM32) |
||
| Line 1: | Line 1: | ||
| + | #REDIRECT [[STM32]] |
||
| + | |||
The STM32F0 series devices have different levels of read protection. The level of read protection has to be specified in the RDP byte which is part of the option bytes at address 0x1FFFF800. A special sequence, consisting of different read / write accesses to special function registers of the MCU are required to change the value of the RDP byte (examples below). |
The STM32F0 series devices have different levels of read protection. The level of read protection has to be specified in the RDP byte which is part of the option bytes at address 0x1FFFF800. A special sequence, consisting of different read / write accesses to special function registers of the MCU are required to change the value of the RDP byte (examples below). |
||
Revision as of 11:16, 10 February 2017
Redirect to:
The STM32F0 series devices have different levels of read protection. The level of read protection has to be specified in the RDP byte which is part of the option bytes at address 0x1FFFF800. A special sequence, consisting of different read / write accesses to special function registers of the MCU are required to change the value of the RDP byte (examples below).
The table below describes the different configuration options:
| RDP byte value | RDP complement value | Read protection level |
|---|---|---|
| 0xAA | 0x55 | Level 0 - No protection |
| ((!= 0xAA) && (!= 0xCC)) | Any value | Level 1 (default) - Read protection |
| 0xCC | 0x33 | Level 2 - No debug access |
For further information regarding this topic, please refer to the ST STM32F0 user manual.
Script files and sample projects
J-Link Commander:
J-Flash:
