Difference between revisions of "Silicon Labs EFR32xG25"
(→Watchdog Handling) |
(→Reset) |
||
Line 19: | Line 19: | ||
===Connect=== |
===Connect=== |
||
===Reset=== |
===Reset=== |
||
+ | *The device uses custom reset with halt after bootloader. |
||
− | *The devices uses normal Cortex-M reset, no special handling necessary, like described [[J-Link_Reset_Strategies#Type_0:_Normal | here]]. |
||
− | *The devices uses Cortex-M Core reset, no special handling necessary, like described [[J-Link_Reset_Strategies#Type_1:_Core | here]]. |
||
− | *The devices uses Cortex-M Rest Pin, no special handling necessary, like described [[J-Link_Reset_Strategies#Type_2:_ResetPin | here]]. |
||
− | *The device uses custom reset:..... |
||
===Attach=== |
===Attach=== |
Revision as of 10:50, 14 June 2023
The Silicon Labs EFR32xG25 are wireless SoCs based on Cortex-M33 microcontrollers.
Contents
Flash Banks
Internal Flash
Flash Bank | Base address | Size | J-Link Support |
---|---|---|---|
Internal flash | 0x08000000 | Up to 1920 KB | |
User Data | 0x0FE00000 | 1 KB |
Watchdog Handling
- The device has 2 Watchdogs, they are feed during programming, if they are enabled.
Device Specific Handling
Connect
Reset
- The device uses custom reset with halt after bootloader.
Attach
Attach is not supported by default because the J-Link initializes certain RAM regions by default.
Security
Evaluation Boards
- [SiliconVendor] [EvalBoardName] evaluation board: http://techwiki.segger.local/WikiTemplateEvalBoard
Example Application
- [SiliconVendor] [EvalBoardName] evaluation board: http://techwiki.segger.local/WikiTemplateEvalBoard#Example_Project