Difference between revisions of "TI EK-TM4C1294XL"
(Created page with "TBD") |
|||
| Line 1: | Line 1: | ||
| + | [[File:TI_EK-TM4C1294XL.jpg | thumb | right | 500 px | TI EK-TM4C1294XL evaluation board]] |
||
| − | TBD |
||
| + | The TI EK-TM4C1294XL is a Texas Instruments evaluation board, with a TM4C1294NCPDT MCU (Cortex-M4). |
||
| + | __TOC__ |
||
| + | <br clear=all> |
||
| + | == Connecting via J-Link == |
||
| + | [[File:TI EK-TM4C1294XL_DebugConnector.jpg | thumb | right | 300 px | TI EK-TM4C1294XL debug connector (Green = Pin 1)]] |
||
| + | The EK-TM4C1294XL comes with a standard 9-pin Cortex-M JTAG/SWD connector (U6) that can be used to connect a J-Link to the TM4C1294 MCU on the board. |
||
| + | TP2 of the board is connected to pin 3 of U6 and must be connected to GND to allow external debugging. |
||
| + | We recommend to use the [https://www.segger.com/products/debug-probes/j-link/accessories/adapters/9-pin-cortex-m-adapter/ SEGGER 9-pin Cortex-M adapter] which makes sure that pin 3 will be connected to GND. |
||
Latest revision as of 11:31, 3 February 2021
The TI EK-TM4C1294XL is a Texas Instruments evaluation board, with a TM4C1294NCPDT MCU (Cortex-M4).
Contents
Connecting via J-Link
The EK-TM4C1294XL comes with a standard 9-pin Cortex-M JTAG/SWD connector (U6) that can be used to connect a J-Link to the TM4C1294 MCU on the board. TP2 of the board is connected to pin 3 of U6 and must be connected to GND to allow external debugging. We recommend to use the SEGGER 9-pin Cortex-M adapter which makes sure that pin 3 will be connected to GND.
