TI Jacinto J721EXCP01EVM

This article describes specifics for TI's Jacinto 7 common evaluation platform (J721EXCP01EVM). The base board can be used with the J721EXSOMG01EVM (TDA4VMx & DRA829Vx) or the J7200XSOMG01EVM (DRA821).
[PICTURE OF BOARD]

Preparing for J-Link

Hardware: TI J721EXCP01EVM + TI J721EXSOMG01EVM (TDA4VMx & DRA829Vx) or TI J7200XSOMG01EVM (DRA821)

• Install J-Link software: V7.94 (or later)
• Connect the J-Link to the board via JTAG MIPI connector (non standard adapter is requireD)
• Insert the SD card delivered with the system-on-module board (or follow the links above to create a boot image)
• Power the board via PWR IN 12V MON DC
• TI's PROCESSOR-SDK-J721E (e.g. 8.2)

• Verify the Connection with e.g. J-Link Commander. The output should look as follows:

400px

Further Information

Further / detailed information regarding the Jacinto 7 evaluation platform as well as instructions how to setup an SD card image can be found here:

J721EXSOMG01EVM (TDA4VMx & DRA829Vx)

• https://www.ti.com/tool/PROCESSOR-SDK-J721E
• https://software-dl.ti.com/jacinto7/esd/processor-sdk-linux-jacinto7/09_00_01_02/exports/docs/devices/J7_Family/linux/index.html

J7200XSOMG01EVM (DRA821)

• https://www.ti.com/tool/PROCESSOR-SDK-J7200
• https://software-dl.ti.com/jacinto7/esd/processor-sdk-linux-j7200/09_00_00_07/exports/docs/devices/J7_Family/linux/index.html