Difference between revisions of "TI LP-EM-CC2340R5"
(Created page with "__TOC__ This article describes specifics for the TI LP-EM-CC2340R5 evaluation board.<br> '''[PICTURE OF BOARD]''' 450px == Preparing for J-Lin...") |
|||
| Line 2: | Line 2: | ||
This article describes specifics for the TI LP-EM-CC2340R5 evaluation board.<br> |
This article describes specifics for the TI LP-EM-CC2340R5 evaluation board.<br> |
||
| − | '''[PICTURE OF BOARD]''' |
||
[[File:TI_LP-EM-CC2340R5.jpg|450px]] |
[[File:TI_LP-EM-CC2340R5.jpg|450px]] |
||
| Line 9: | Line 8: | ||
*Power the board via 3.3V DC (3.3V connected 3V3; GND connected to GND) |
*Power the board via 3.3V DC (3.3V connected 3V3; GND connected to GND) |
||
*Verify the Connection with e.g. [https://wiki.segger.com/J-Link_cannot_connect_to_the_CPU#Verify_functionality_using_J-Link_Commander J-Link Commander]. The output should look as follows: |
*Verify the Connection with e.g. [https://wiki.segger.com/J-Link_cannot_connect_to_the_CPU#Verify_functionality_using_J-Link_Commander J-Link Commander]. The output should look as follows: |
||
| − | '''[PICTURE OF CONNECT]''' |
||
[[File:TI_CC2340R5_Connect.PNG|400px]] |
[[File:TI_CC2340R5_Connect.PNG|400px]] |
||
Revision as of 16:29, 16 May 2023
Contents
This article describes specifics for the TI LP-EM-CC2340R5 evaluation board.
Preparing for J-Link
- Connect the J-Link to J4
- Power the board via 3.3V DC (3.3V connected 3V3; GND connected to GND)
- Verify the Connection with e.g. J-Link Commander. The output should look as follows:
Example Project
TBD
