TI LP-EM-CC2340R5

From SEGGER Wiki

Revision as of 16:29, 16 May 2023 by Erik (talk | contribs) (Created page with "__TOC__ This article describes specifics for the TI LP-EM-CC2340R5 evaluation board.<br> '''[PICTURE OF BOARD]''' 450px == Preparing for J-Lin...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

Contents

1 Preparing for J-Link
2 Example Project

This article describes specifics for the TI LP-EM-CC2340R5 evaluation board.
[PICTURE OF BOARD]

Preparing for J-Link

Connect the J-Link to J4
Power the board via 3.3V DC (3.3V connected 3V3; GND connected to GND)
Verify the Connection with e.g. J-Link Commander. The output should look as follows:

[PICTURE OF CONNECT]

Example Project

TBD

Retrieved from "https://wiki.segger.com/index.php?title=TI_LP-EM-CC2340R5&oldid=14944"