TI LaunchPad CC1354P10

From SEGGER Wiki
Revision as of 10:59, 3 February 2023 by Erik (talk | contribs)
Jump to: navigation, search

This article describes specifics for the TI LaunchPad CC1354P10 evaluation board.
TI LaunchPadCC1354P10.jpg

Preparing for J-Link

  • Connect the J-Link to ......
  • Power the board via........
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

TI CC1354P10 Connect.PNG

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the TI LaunchPad CC1354P10.
It is a simple Hello World sample linked into the internal flash.

SETUP

Retrieved from "https://wiki.segger.com/index.php?title=TI_LaunchPad_CC1354P10&oldid=14095"