Difference between revisions of "TM4C123G LaunchPad"
(Created page with "The TI TM4C123G LaunchPad evaluation board does not come with an external debug connector. Therefore, in order to use an external debug probe, like the J-Link, at the first, t...") |
|||
(One intermediate revision by one other user not shown) | |||
Line 1: | Line 1: | ||
+ | [[Category:Evalboards]] |
||
− | The TI TM4C123G LaunchPad evaluation board does not come with an external debug connector. Therefore, in order to use an external debug probe, like the J-Link, at the first, the Tiva C Series TM4C123G LaunchPad board needs to be manually setup: |
||
+ | The TI TM4C123G LaunchPad evaluation board does not come with an external debug connector. Therefore, in order to use an external debug probe like the J-Link, at the first, the Tiva C Series TM4C123G LaunchPad board needs to be manually setup: |
||
− | * Solder a 7-pin strip header to DBG (see image below) |
||
+ | * Solder a strip header to DBG (see image below) |
||
− | * Connect the debug interface signals manually (e.g. using jumping wires) as shown in the table below |
||
+ | * Connect the debug interface signals manually (e.g. using jumping wires) as described in the table below |
||
− | |||
+ | <table> |
||
+ | <tr> |
||
+ | <td valign="top">[[File:wiki-board-TM4C123G-LaunchPad.png|500px]]</td> |
||
+ | <td valign="top"></td> |
||
+ | <td valign="top"> |
||
{| class="wikitable" |
{| class="wikitable" |
||
|- |
|- |
||
Line 21: | Line 26: | ||
| GND || Pin 4 (GND) |
| GND || Pin 4 (GND) |
||
|} |
|} |
||
+ | </td> |
||
− | |||
+ | </tr> |
||
− | |||
+ | </table> |
||
− | [[File:wiki-board-TM4C123G-LaunchPad.png]] |
Latest revision as of 14:38, 15 May 2024
The TI TM4C123G LaunchPad evaluation board does not come with an external debug connector. Therefore, in order to use an external debug probe like the J-Link, at the first, the Tiva C Series TM4C123G LaunchPad board needs to be manually setup:
- Solder a strip header to DBG (see image below)
- Connect the debug interface signals manually (e.g. using jumping wires) as described in the table below
|