Difference between revisions of "TWR-KV58F220M"
(Replaced content with "__TOC__ = Enable external debug access = The TWR-KV58F220M eval board supports to connect an external J-Link for debugging. However, by default the board is shipped in a...") |
|||
| (3 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
| + | [[Category:Evalboards]] |
||
__TOC__ |
__TOC__ |
||
| Line 4: | Line 5: | ||
The TWR-KV58F220M eval board supports to connect an external J-Link for debugging. However, by default the board is shipped in a configuration where connecting an external J-Link is not possible. This is because the OpenSDA circuit permanently drives the SWCLK and SWDIO pins. |
The TWR-KV58F220M eval board supports to connect an external J-Link for debugging. However, by default the board is shipped in a configuration where connecting an external J-Link is not possible. This is because the OpenSDA circuit permanently drives the SWCLK and SWDIO pins. |
||
| − | In order to enable external debug access, J19 and J20 need to be open. This isolates the OpenSDA circuit from the target MCU. |
+ | In order to enable external debug access, '''J19 and J20 need to be open'''. This isolates the OpenSDA circuit from the target MCU. |
| + | |||
| − | <!-- [[File:YES.png|20px|link=]] --> |
||
| + | [[File:TWR-KV58F220M.png]] |
||
Latest revision as of 13:17, 15 May 2024
Contents
Enable external debug access
The TWR-KV58F220M eval board supports to connect an external J-Link for debugging. However, by default the board is shipped in a configuration where connecting an external J-Link is not possible. This is because the OpenSDA circuit permanently drives the SWCLK and SWDIO pins.
In order to enable external debug access, J19 and J20 need to be open. This isolates the OpenSDA circuit from the target MCU.
