TWR-KV58F220M

From SEGGER Wiki
Revision as of 11:46, 22 February 2018 by Alex (talk | contribs)
Jump to: navigation, search


but it is mandatory to change the device name to the actual device used when using J-Flash or doing any flash programming in J-Link commander.

Please note that securing a device via J-Link command files is limited in a way that interpretation of return values, if / else branches etc. are not available. Therefore, production programming and securing of devices can only be done with J-Flash or the J-Link SDK. In any case, it is the responsibility of the user to verify that the required read out protection is active before the programming device leaves the production facility.


-->

Retrieved from "https://wiki.segger.com/index.php?title=TWR-KV58F220M&oldid=2274"