Using embOS with Renesas RA family, Flexible Software Package (FSP) and IAR

From SEGGER Wiki
Revision as of 13:37, 22 October 2021 by Til (talk | contribs)
Jump to: navigation, search


The Renesas Flexible Software Package (FSP) is an enhanced software package designed to provide easy-to-use, scalable, high-quality software for embedded system designs using Renesas RA family of Arm Microcontrollers.

This Wiki describes how to add embOS Cortex-M IAR to an existing Renesas FSP project. With the resulting project you can still use the Renesas Smart Configurator. The following description uses Renesas FSP 3.1 and Renesas Smart Configurator 2021-04.

RA SmartConfigurator version.png

Generate the Renesas FSP project

Start the Renesas Smart Configurator and create a new IAR EWARM project with the following options. Project name and location are up to you. This Wiki article assumes the project is created within an embOS shipment in c:\Work\embOS_CortexM_IAR_V8_Free_V5.14.0.0\Start\BoardSupport\Renesas\R7FA4M2AD_EK_RA4M2\.

RA SmartConfigurator Project.png

RA SmartConfigurator IAR.png

RA SmartConfigurator Flat.png

RA SmartConfigurator NoRTOS.png

RA SmartConfigurator BareMetal.png

Open the project in IAR EWARM

IAR open.png

Add an embOS application and exclude main.c

IAR application.png

Add an embOS library and BSP files

Add all files from the embOS BSP folder SEGGER and Setup and one embOS library. You can take these two folders from an other embOS BSP within that shipment. BSP.c might need to be updated according to your hardware.

IAR BSP Lib.png

Add Include paths and define

  • Add the include paths $PROJ_DIR$/../../../Inc and $PROJ_DIR$/SEGGER.
  • Add the define OS_LIBMODE_DP.

IAR Preprocessor.png

Update Renesas FSP files regarding stack symbol

The Renesas FSP files use the stack symbol .stack. embOS instead uses the stack symbol CSTACK. Therefore all occurrences of .stack needs to be replaced with CSTACK.

  • fsp.icf
rw section CSTACK };

rw section CSTACK,
  • bsp_compiler_support.h
  • system.c
#define BSP_PRV_STACK_LIMIT                          ((uint32_t) __section_begin("CSTACK"))
#define BSP_PRV_STACK_TOP                            ((uint32_t) __section_end("CSTACK"))

#pragma section="CSTACK"

Build the project

You should now be able to successfully build the project:

IAR build.png

Renesas Smart Configurator

If IAR EWARM is configured accordingly you can start the Renesas Smart Configurator directly from within the IDE and generate new FSP files:

IAR SmartConfigurator.png


With only a few steps it is possible to create an embOS project for any Renesas RA device and to still be able to use the Renesas Smart Configurator to generate or modify FSP files.