i.MX8M
Contents
The NXP i.MX8M is a embedded multicore processor consisting of one Cortex-M4 and four Cortex-A53.
Debugging
J-Link supports debugging for the Cortex-M4. During connect the M4 is set to execute an endless loop at 0x1FFE0000 (TCML RAM) and afterwards halted.
Reset
J-Link currently does not support device reset.
Example Application
The following example projects were created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the M4 core of the MIMX8MQ5 MCU. It is a simple counting loop.
SETUP
- J-Link software: V7.62
- Embedded Studio: V5.70a
- Hardware: MIMX8MQ5 MCU
- Link: File:NXP MIMX8MQ5 M4.zip