nRF9161-DK
Revision as of 11:25, 7 November 2023 by Artjom.Kister (talk | contribs)
This article describes specifics for the Nordic Semiconductor nRF9161-DK evaluation board.
Minimum requirements
- J-Link software V7.92m or later
Preparing for J-Link
- Connect the J-Link to the debug connector (P18)
- Power the board USB Type-C Connector (J6)
- Turn the power switch on (SW6)
- Verify the Connection with e.g. J-Link Commander. The output should look as follows: