GigaDevice GD32F310C-EVAL

From SEGGER Wiki
Jump to navigation Jump to search

This article describes specifics for the GigaDevice GD32F310C-EVAL evaluation board.
GigaDevice GD32F310C-EVAL GD32F310C8 board.jpg

Preparing for J-Link

  • Connect the J-Link to this pins:
J-Link Pin Connector Pin Name
VTref JP1 4 +3V3
GND JP1 3 GND
TMS/SWDIO JP1 2 IO
TCK/SWCLK JP1 1 CK
  • Power the board via CN100.
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

GigaDevice GD32F310C-EVAL GD32F310C8 connect.png

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the GigaDevice GD32F310C-EVAL.
It is a simple Hello World sample linked into the internal flash.

SETUP