GigaDevice GD32H759I-EVAL

From SEGGER Wiki
Jump to: navigation, search

This article describes specifics for the GigaDevice GD32H759I-EVAL evaluation board. It can be used to test & verify GD32H7 device support.

GigaDevice GD32H7.jpg

Minimum requirements

  • J-Link software V7.92l or later

Preparing for J-Link

  • Connect the J-Link to the JTAG header (JP1)
  • Power the board with 5V via the external power supply (CN1)
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

GigaDevice GD32H7 Connect.png