GigaDevice GD32VW553H-EVAL

From SEGGER Wiki
Jump to: navigation, search

This article describes specifics for the GigaDevice GD32VW553H-EVAL evaluation board.
GigaDevice-GD32VW553H-EVAL GD32VW553H board.jpg

Preparing for J-Link

  • Connect the J-Link to JP1.
  • Power the board via CN2.
  • Verify the Connection with e.g. J-Link Commander. The output should look as follows:

GigaDevice-GD32VW553H-EVAL GD32VW553H connect.png

Example Project

The following example project was created with the SEGGER Embedded Studio project wizard and runs out-of-the-box on the GigaDevice GD32VW553H-EVAL.
It is a simple Hello World sample linked into the internal flash.

SETUP

Retrieved from "https://wiki.segger.com/index.php?title=GigaDevice_GD32VW553H-EVAL&oldid=16809"