HPMicro HPM6200EVK

From SEGGER Wiki

Jump to: navigation, search

Contents

1 Minimum requirements
2 Preparing for J-Link

This article describes specifics for the HPMicro HPM6200EVK evaluation board. It can be used to test & verify HPM62xx device support.

Minimum requirements

J-Link software V7.86g or later

Preparing for J-Link

Remove JP1, JP2, JP3 and JP4
Connect the J-Link to the JTAG connector (CN1)
Power the board via external power supply USB (J5)
Verify the Connection with e.g. J-Link Commander. The output should look as follows:

Retrieved from "https://wiki.segger.com/index.php?title=HPMicro_HPM6200EVK&oldid=14707"