HPMicro HPM6800EVK

From SEGGER Wiki

Jump to: navigation, search

Contents

1 Minimum requirements
2 Preparing for J-Link

This article describes specifics for the HPMicro HPM6800EVK evaluation board. It can be used to test & verify HPM68xx device support.

Minimum requirements

J-Link software V7.94i or later

Preparing for J-Link

Remove JP6, JP7, JP8, JP9, JP10
Connect the J-Link to the JTAG connector (IDC1)
Power the board via external power supply USB (J5)
Verify the Connection with e.g. J-Link Commander. The output should look as follows:

Retrieved from "https://wiki.segger.com/index.php?title=HPMicro_HPM6800EVK&oldid=17654"